Windows 10 has a built-in tool for fixing tasks that are stuck in the “Running” status. However, this process stops working if you have more than 4,079 running processes. The solution is to disable some of these processes and run only the ones necessary.
The “host process for windows tasks has stopped working windows 7” is a common error that can be fixed by following the steps below.
Have you run across a notice that says “Host Process for Windows Services has ceased working?”
It’s difficult to find out what may be the root of such an issue since the pop-up window doesn’t provide any extra information. Despite the fact that there is no specific reason for this problem, there are a variety of remedies available to assist you in resolving it.
Running jobs are thought to use a large quantity of memory or CPU, resulting in this error. Error pop-ups appear as a result of such tasks.
Let’s go right to the point on how to address the problem without wasting your time.
Repairing damaged BITS files is the first solution.
- To get started, use Windows + R on your keyboard to open the Run utility dialog box.
- Then, using the Enter key, input the following address: ProgramdataMicrosoftnetworkdownloader
- To provide administrator rights and access the folder, click “Continue.”
- Once File Explorer is open, remove any files that begin with the letter “qmgr,” such as qmgr0.dat, qmgr1.dat, and so on.
- After you’ve removed these files, go ahead and upgrade your operating system through Settings Update & Security Windows Update.
The corrupted BITS should be replaced using the instructions above, and the problem should be resolved. If you are unable to remove the files listed above, see this page for instructions on how to fix faulty BITS files.
Clean Boot is the second option.
There are times when third-party programs clash with the operating system.
You could benefit from a clean boot. Error: Host Process for Windows Services has ceased to function
A clean boot is usually performed on Windows in order to start the system with the bare minimum of drivers and apps.
This procedure is used to fix Windows problems that are caused by damaged drivers and software files.
There are a variety of methods to start your computer in clean boot mode, but I’ll walk you through the most important ones that will help you resolve this issue.
Step 1: Selective Startup Load
- To open the Run utility, press Windows Key + R.
- Click OK after typing’msconfig’.
- Make sure the ‘Selective starting’ option is enabled. This should be under the General tab.
- Under selected startup, uncheck the ‘Load startup items’ option.
- Go to the Service tab and uncheck the option that says “Hide all Microsoft services.”
- To stop any superfluous services that may create problems, click ‘Disable all.’
- On the startup tab, choose ‘Open Task Manager.’
- Disable all startup applications that are currently active.
- Finally, click OK before restarting your computer.
Proceed to the following stage to troubleshoot software compatibility concerns when everything is in place.
Step 2: Make half of the services available.
- Using the Windows Key + R combination, open a new window.
- Click OK after typing’msconfig’.
- Check the ‘Hide all Microsoft services’ option on the Service tab.
- After that, enable half of the services listed in the Service list.
- After that, click OK and restart your computer.
Open Event Viewer or Reliability History as a third option.
- Press Windows + R to open the Run dialog box.
- To launch the Event Viewer, type eventvwr and then hit Enter on your keyboard.
- From the left panel, double-click on Windows Logs.
- Then, make sure the Application and System Logs checkbox is selected.
- Find all events that have been marked with a red X in the next window.
- Now look at the specifics of the mistake. Look for an error that says “Windows’ host process has ceased operating.”
- Once it is discovered, we may begin troubleshooting and attempting to resolve the problem.
However, if no meaningful information about this problem is available, utilize the Reliability history as follows:
- Type “Reliability” in the Search box after pressing the Windows key.
- Select View Reliability History from the list of search results.
- Look for an event with the message “Windows’ host process has ceased operating.”
- Take note of the steps that led up to the problem, and then follow the troubleshooting steps below.
- If the issue in the aforementioned service/s is caused by a third-party program, first remove it from the control panel.
Solution 4: Restore the system
A system restore is the act of undoing changes you’ve made to your computer and restoring it to a previous state.
It is possible that some of the applications we install on our devices, such as drivers, cause a computer system to malfunction unexpectedly. These problems may cause Windows to behave in an unpredictable manner.
Uninstalling the software or driver that you recently installed might sometimes assist in resolving the issue. However, this does not always work, and in such circumstances, you’ll need to use a previously generated restore point to resolve the problem.
Using System Restore on Windows, the restore point usually restores your system to a previous date when everything was working properly.
What is the procedure for doing a system restore?
If you made a restore point, or if your PC was set to make restore points automatically, you may simply restore your PC to its previous configuration by utilizing the restore points.
Using the Windows 10 Restore feature
Follow the instructions below to utilize the restore capability in Windows 10:
- After pressing the Start button, put Control Panel into the search box.
- To open the Control Panel, select it from the search results.
- Now choose the System and Security option, then the System option.
- Click System Protection while you’re still in the System window. This may be found on the System window’s upper left-hand side.
- Performing the above step will bring you to the System Properties window. Select the drive for which you wish to execute the Restore from the drop-down menu.
- After that, go to Protection Settings and choose System Restore.
- When the next window appears, click the Next button.
- After that, you’ll see a list of Restore points that have been created. Simply choose the most recent Restore point from the drop-down menu and click Next.
- A confirmation dialog box will open, in which you must confirm that you wish to execute a system restoration before clicking Finish.
- To confirm, press the Yes button. This prompt is merely to let you know that once System Restore is started, it cannot be stopped.
Please keep in mind that once the procedure begins, it cannot be halted or interrupted. As a result, ensure sure your computer is turned on.
Performing a Safe Mode Restore
When System Restore isn’t working, there are a few things you can do. Various Windows bugs or software conflicts are generally to blame. This implies that your computer system will be unable to roll back to the selected Restore point if this occurs.
Thanks to Microsoft, there is now a solution to this issue. All you have to do now is start Windows in Safe Mode.
When you start your computer in safe mode, just the most important parts of the operating system are activated, and any potentially dangerous software, programs, drivers, or settings are deactivated.
In most cases, restoring a computer in safe mode is a success.
Follow the instructions below to start your computer in Safe Mode and begin the restore:
- Use one of the ways given below to start your computer in Safe Mode.
- After your system has been put into safe mode, go to Troubleshoot and then Advanced Options.
- Under Advanced choices, you’ll get a list of six options; ignore the rest and select System Restore.
- Select a System Restore point to which the System should be restored. Ensure that the most recent restore point is selected.
Wait till the procedure is finished. You’ll be brought to the login screen or your desktop after the restoration procedure is finished.
When your computer won’t start up, you may do a restore.
You may conduct a Restore if your machine is not booting or Windows is not beginning correctly.
Follow the methods below if you find yourself in this situation:
- Make sure your computer is turned off completely.
- To access the Boot menu, hold down the power button while pressing the F8 key repeatedly.
- A window for troubleshooting will appear. Select Advanced settings from the menu.
- Procedure 1: Select System Restore and then follow steps 7 through 10 in method 1.
Although we’ll be concentrating on Windows 10, the same procedures may be used to restore Windows 8.1 and Windows 7.
Also, although a System Restore is really useful, there are a few things to keep in mind.
Allow me to clarify something for you while working with restore points or the restoration procedure.
- System Restore will not be able to defend your machine against viruses or malware.
- If you establish any new user accounts after the previous restore point was made, the restore point will be wiped, but your data and files will be saved.
- The goal of a Windows backup is not served by a restore point.
I hope that one of the ways above has helped you in using System Restore on Windows 7, 6.1, and 10, and that you’ve been able to resolve the Host Process for Windows Services has ceased operating difficulty.
Solution 5: Execute the DISM Tool
When attempting to resolve this problem, you should avoid using the SFC command since it will replace Microsoft Opencl.dll with Nvidia.
It is consequently advised that you perform the DISM Checkhealth command to verify the system integrity.
Here’s how you can go about doing it:
- To do so, hold down the Windows key and the X key.
- Choose Command Prompt (Admin).
- Now enter the following instructions one by one, pressing Enter after each one:
/Online /Cleanup-Image /StartComponentCleanup Dism /Online /Cleanup-Image /StartComponentCleanup
/Cleanup-Image /RestoreHealth /Dism /Online
- If the preceding command does not resolve the issue, try substituting C:RepairSourceWindows with the path of your repair source (Windows Installation or Recovery Disc):
/Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows Dism /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows
/Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess Dism /Online /Cleanup-Image /RestoreHealth
- Run the DISM command to check the system’s integrity:
CheckHealth /Dism /Online /Cleanup-Image
- Restart your computer to ensure that the modifications take effect, and then check to see whether the problem has been resolved.
Run the System File Checker as a last resort.
If the DISM Tool proved ineffective, an SFC may be useful.
- To access the Run utility, use the Windows + R keys on your keyboard.
- To open the Command Prompt with administrator rights, type “cmd,” press Enter, and then select the Yes option.
- Type the following command into the Command Prompt once it has opened:
sfc /scannow sfc /scannow sfc /s
- To run it, press Enter.
- Wait until the SFC scan has completed and the corrupt files have been repaired. Do not close the Command Prompt or turn off your computer during this period.
- After the scan is finished, reboot your device.
Solution 7: Use CCleaner and Malwarebytes to clean up your computer.
- Begin by downloading and installing CCleaner and Malwarebytes.
- After installing both apps, launch Malwarebytes.
- Allow it time to search and examine your system for any potentially dangerous files. If any malware is discovered, this software will instantly delete it.
- After that, launch CCleaner.
- Go to the “Cleaner” section, then to the “Windows” tab.
- Check the cleaning options below, then click Run Cleaner. Allow time for the procedure to complete.
- If you wish to thoroughly clean your system, go to the Registry tab and look for the following:
- Select Scan for Problems.
- Permission to scan should be granted to the app.
- Select Fix Selected Issues from the drop-down menu.
- Whether Cleaner asks if you want to backup registry changes, choose Yes.
- When the backup procedure is finished, choose Fix All Selected Issues.
- To save your changes, restart your computer.
Solution 8: Use Memtest86 to test your memory.
Make sure you have access to another computer since we’ll need to download the program and burn it on a USB flash drive.
Also, since this patch takes a long time to complete, I recommend doing it overnight or when you don’t have anything else pressing to do.
Once you’ve got everything in order, follow the steps below:
- Connect your USB flash drive to your PC.
- Install the Windows Memtest86 Auto-installer for USB Key on your computer.
- After you’ve installed the application, right-click on the picture file you just downloaded and choose “Extract here.” Run Memtest86+ USB Installer after opening the folder.
- Select your USB disk in the following box to begin burning the MemTest86 application. Please keep in mind that this will format your USB device.
- Unplug the USB drive after burning the program, then connect it into the machine that was displaying the Host Process for Windows Services has ceased operating message.
- Restart your computer.
- When you choose to boot from the USB flash drive, Memtest86 will begin checking for memory corruption right away.
- If your PC passes all of the tests performed by this utility, your memory is in great operating order. Memtest86, on the other hand, will detect memory corruption if the previous procedures have failed. This indicates that the problem in question is caused by a faulty memory.
- Simply replace your RAM to fix the Host Process for Windows Services has ceased operating problem.
You may also be interested in:
Watch This Video-
The “host process for windows services has stopped working” is a problem that has been present for a while. Microsoft released an update to fix the issue.
Frequently Asked Questions
Is Host process for Windows tasks a virus?
A: No, it is not.
How do I fix Windows host process rundll32 has stopped working?
A: Sadly, there is no solution for this issue as we do not know any way to fix it. However, you may be able to work around the problem by using an alternative application that does not require access to your DLLs.
How do I close the Host process for Windows Services?
A: To close the Host process for Windows Services, you can use Task Manager.
- host process for windows tasks has encountered a problem and needs to close
- host process for windows tasks has stopped working server 2016
- host process for windows tasks 100 disk
- host process for windows tasks high memory
- host process for windows tasks high cpu windows 10